Lexmark X945E Service Manual Download

Page: 135 / 847

Diagnostic information

2-19

7510

Go Back

294.01

Scanner jam

Sensor (ADF pre-registration)
late jam (side 2)

The media is late reaching the sensor (ADF pre-
registration) within the specified time after the ADF
registration motor was turned on.

Go to

“294.01 Sensor (ADF pre-registration) late

jam (side 2)” on page 2-97

294.02

Scanner jam

Sensor (ADF pre-registration)
lag jam (inverting)

The media reached the sensor (ADF pre-
registration) but did not clear it within the specified
time.

Go to

“294.02 Sensor (ADF pre-registration) lag

jam (inverting)” on page 2-99

295.00

Scanner jam

Size mismatch Jam (mix-
size)

During mixed original document feeding, it was
detected that the Fast Scan Direction size was
different from the width of the document guide.

Go to

“295.00 Size mismatch jam (mix-size)” on

page 2-102

295.01

Scanner jam

Size mismatch Jam (no mix-
size)

The second and subsequent documents are
different size from the first document.

Go to

“295.01 Size mismatch jam (no mix-size)”

on page 2-104

295.02

Scanner jam

Invalid combine size jam

An invalid document size combination was
detected.

Go to

“295.02 Invalid combine size jam” on

page 2-105

295.03

Scanner jam

Media too short size jam

The system detected a document with a length
shorter than 115mm in the Slow Scan Direction.

Go to

“295.03 Too short size jam” on page 2-106

295.04

Scanner jam

Media too long size jam

The system detected a document with the following
length in the Slow Scan Direction:

• Simplex mode: 672.4mm or longer
• Duplex mode: 480.1mm or longer

Go to

“295.04 Too long size jam” on page 2-107

295.05

Scanner jam

Mixed size not supported

When feeding mixed size originals, the user has
selected a fixed size from the menu settings.

“295.05 Mixed size not supported” on
page 2-109

298.01

Scanner power cable missing
or unplugged

The scanner is not receiving input power.

Go to

“298.01 Scanner cable missing or

unplugged” on page 2-109

Missing or
defective
<color>
cartridge

<Color> toner cartridge
detection error

The <Color> toner cartridge is defective or not
installed.

Go to

“<Color> toner cartridge detection error”

on page 2-220

Missing or
defective black
cartridge

Black toner cartridge
detection error

The Black toner cartridge is defective not installed.

Go to

“Toner cartridge error” on page 2-212

Error code or

message

Error contents

Description/Action

Summary of Contents for X945E
















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for X945E

Reviews:

Related manuals for X945E

Brands by name

Popular brands

Lexmark X945E, Service Manual

Search results

Summary of Contents for X945E

Reviews:

Related manuals for X945E

Brands by name

Popular brands