Lexmark X945E Service Manual Download

Page: 192 / 847

2-76

Service Manual

7510

Go Back

Check the ADF rolls for wear.

Is the ADF feed/pick roll assembly or the ADF separation roll
guide assembly free of excess wear?

Go to step 3.

Clean or replace
the ADF feed/pick
roll assembly or
the ADF
separation roll
guide assembly.

Go to

“ADF feed/

pick roll
assembly
removal” on
page 4-149

“ADF separation
roll guide
assembly” on
page 4-162

Check the media path for contaminates.

Is the media path free of excess media dust and foreign
objects such as paper clips and staples?

Go to step 4.

Remove all
contaminates from
the media path.

Check the inverter gate condition.

Is the inverter gate free of damage and warpage and does it
move smoothly?

Go to step 5.

Replace the
inverter gate.

Go to

“Inverter

gate removal” on
page 4-159

Check the sensor (ADF registration) for proper operation.

1. Enter the Diagnostics Menu.
2. Touch

SCANNER TESTS.

3. Touch

Sensor Tests.

4. Touch

ADF registration.

Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?

Go to step 7.

Go to step 6.

Check the sensor (ADF registration) for proper connection.

Is the above component properly connected?

Replace the
sensor (ADF
registration).

Go to

“Sensor

(ADF
registration)
removal” on
page 4-156

Replace the
connection.

Check the ADF feed drive motor assembly for proper
operation.

Caution:

When performing motor tests, ensure

that all cover and door interlock switches are
overridden.

1. Enter the Diagnostics Menu.
2. Touch

MOTOR TESTS.

3. Touch

Scanner Motor Tests.

4. Touch

ADF feed drv mtr.

Does the above component operate properly?

Go to step 9.

Go to step 8.

Step

Check

Yes

Summary of Contents for X945E
















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for X945E

Reviews:

Related manuals for X945E

Brands by name

Popular brands

Lexmark X945E, Service Manual

Search results

Summary of Contents for X945E

Reviews:

Related manuals for X945E

Brands by name

Popular brands