Lexmark X945E Service Manual Download

Page: 195 / 847

Diagnostic information

2-79

7510

Go Back

Check the media path for contaminates.

Is the media path free of excess media dust and foreign
objects such as paper clips and staples?

Go to step 5.

Remove all
contaminates from
the media path.

Check the sensor (ADF registration) for proper operation.

1. Enter the Diagnostics Menu.
2. Touch

SCANNER TESTS.

3. Touch

Sensor Tests.

4. Touch

ADF registration.

Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?

Go to step 7.

Go to step 6.

Check the sensor (ADF registration) for proper connection.

Is the above component properly connected?

Replace the
sensor (ADF
registration).

Go to

“Sensor

(ADF
registration)
removal” on
page 4-156

Replace the
connection.

Check the ADF registration motor for proper operation.

Caution:

When performing motor tests, ensure

that all cover and door interlock switches are
overridden.

1. Enter the Diagnostics Menu.
2. Touch

MOTOR TESTS.

3. Touch

Scanner Motor Tests.

4. Touch

ADF registration drv mtr.

5. Touch

Forward or reverse.

Does the above component operate properly?

Go to step 9.

Go to step 8.

Check the ADF registration motor for proper connection.

Is the above component properly connected?

Replace the
ADF registration
motor.

Go to

“ADF

registration
motor removal”
on page 4-166

Replace the
connection.

Place an undamaged document in the ADF, and perform a
ADF test.

Does the error remain?

Replace the
ADF controller
card assembly.

Go to

“ADF

controller card
assembly
removal” on
page 4-145

Go to step 10.

Problem solved.

Place an undamaged document in the ADF, and perform a
ADF test.

Does the error remain?

Replace the RIP
card assembly.

Go to

“RIP card

assembly
removal” on
page 4-84

Problem solved.

Step

Check

Yes

Summary of Contents for X945E
















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for X945E

Reviews:

Related manuals for X945E

Brands by name

Popular brands

Lexmark X945E, Service Manual

Search results

Summary of Contents for X945E

Reviews:

Related manuals for X945E

Brands by name

Popular brands