Lexmark X945E Service Manual Download

Page: 495 / 847

Repair information

4-63

7510

Go Back

Developer unit assembly removal

Note:

The following procedure can be applied to the C, M, Y, and K developer unit assemblies.

Warning:

When removing developer unit assemblies, ensure that the area on the floor in front of the

machine is protected from toner spillage.

Warning:

When replacing the developer unit assemblies, ensure that all toner spillage and contamination

is removed.

Warning:

Always perform the sensor (ATC sensor) setup and adjustment if required or print quality

problems may occur. Go to

“Sensor (ATC) setup” on page 4-260

Warning:

Always perform color registration adjustment (RegCon) when removing or reinstalling the

printhead, developer unit assembly or developer interlock plate assembly or print quality problems may
occur. See

“” on page 4-264

1. Remove the transfer belt assembly. See

“Transfer belt unit assembly removal” on page 4-16

2. Remove the printer front door assembly. See

“Printer front door assembly removal” on page 4-3

3. Remove the front left cover. See

“Front left cover removal” on page 4-9

4. Remove the waste toner cartridge cover. See

“Waste toner cartridge cover removal” on page 4-49

5. Remove the waste toner cartridge sensor assembly. See

“Waste toner cartridge sensor assembly

removal” on page 4-49

Note:

The waste toner cartridge sensor assembly does not need to be removed from the machine. It may

be allowed to hang by the wires.

6. Remove the inner cover. See

“Inner cover removal” on page 4-53

Warning:

When removing the CMY toner add assemblies, the toner cartridges should be left installed in

order to reduce toner spillage.

7. Remove the three CMY toner add assemblies. See

“CMY toner add assembly removal” on page 4-57

Warning:

When removing the K toner add assembly, the toner cartridge should be left installed in order to

reduce toner spillage.

8. Remove the K toner add assembly. See

“K toner add assembly removal” on page 4-58

9. Remove the developer interlock plate assembly. See

“Developer interlock plate assembly removal” on

page 4-59

Note:

When removing the developer unit assembly, position it in the way it is removed from the machine,

or toner spillage will occur.

10. Ensure the transfer belt lift handle is in the down position and gently remove the appropriate developer unit

assembly (A).

Note:

When removing the developer unit assembly, ensure that it is positioned in the same manner in

which it is removed from the machine or spillage will occur.

Summary of Contents for X945E
















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for X945E

Reviews:

Related manuals for X945E

Brands by name

Popular brands

Lexmark X945E, Service Manual

Search results

Summary of Contents for X945E

Reviews:

Related manuals for X945E

Brands by name

Popular brands