Lexmark XC2235 User Manual Download

Page: 111 / 299

Menu item

Description

Memory Use

All receive

Mostly receive

Equal*

Mostly send

All send

Set the amount of internal printer memory allocated for faxing.

Note:

This menu item prevents memory buffer conditions and failed faxes.

Cancel Faxes

Allow*

Don't Allow

Cancel outgoing faxes before they are transmitted, or cancel incoming faxes
before they ﬁnish printing.

Fax Number Masking

Off*

From Left

From Right

Specify the format for masking an outgoing fax number.

Digits to Mask

0–58 (0*)

Specify the number of digits to mask in an outgoing fax number.

Enable Line Connected
Detection

On*

Off

Determine whether a telephone line is connected to the printer.

Note:

Detection takes place when turning on the printer and before each call.

Enable Line In Wrong Jack
Detection

Off

On*

Determine whether a telephone line is connected to the correct port on the
printer.

Note:

Detection takes place when turning on the printer and before each call.

Enable Extension in Use
Support

Off

On*

Determine whether a telephone line is used by another device, such as another
phone on the same line.

Note:

Detection takes place when turning on the printer and before each call.

Optimize Fax Compatibility

Conﬁgure the printer fax functionality for optimal compatibility with other fax
machines.

Fax Transport

T.38

Analog

G.711

etherFAX

Set the fax transport method.

Notes:

•

This menu item appears only if an etherFAX or Fax over IP (FoIP) license
bundle is installed in the printer.

•

Depending on your printer model, the factory default settings may vary.

Note:

An asterisk (*) next to a value indicates the factory default setting.

HTTPS Fax Settings

Note:

This menu appears only if Fax Transport is set to etherFAX.

Understanding the printer menus

111

Summary of Contents for XC2235












































































































































































































































































































Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands

Lexmark XC2235, User Manual

Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands