Lexmark XC2235 User Manual Download

Page: 166 / 299

Maintaining the printer

Warning—Potential Damage:

Failure to maintain optimum printer performance, or to replace parts and

supplies, may cause damage to your printer.

Conﬁguring supply notiﬁcations

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Settings

Device

Notiﬁcations

From the Supplies menu, click

Custom Supply Notiﬁcations

Select a notiﬁcation for each supply item.

Apply the changes.

Setting up e

‑

mail alerts

Conﬁgure the printer to send e

‑

mail alerts when supplies are low, when paper must be changed or added, or

when there is a paper jam.

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Settings

Device

Notiﬁcations

‑

mail Alert Setup

, and then conﬁgure the settings.

Note:

For more information on SMTP settings, contact your e

‑

mail provider.

Click

Setup E-mail Lists and Alerts

, and then conﬁgure the settings.

Apply the changes.

Viewing reports

From the control panel, navigate to:

Settings

Reports

For non-touch-screen printer models, press

to navigate through the settings.

Select the report that you want to view.

Maintaining the printer

166

Summary of Contents for XC2235












































































































































































































































































































Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands

Lexmark XC2235, User Manual

Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands