Lexmark XC2235 User Manual Download

Page: 233 / 299

Action

Yes

Step 7

Make sure that the printer is not overheating.

Notes:

•

Allow the printer to cool down after a long print job.

•

Observe the recommended ambient temperature for the
printer. For more information, see

“Selecting a location

for the printer” on page 11

Print the document.

Is the printer printing slow?

Contact

customer

support

The problem is
solved.

Job prints from the wrong tray or on the wrong paper

Action

Yes

Step 1

Check if you are printing on the correct paper.

Print the document.

Is the document printed on the correct paper?

Go to step 2.

Load the correct
paper size and paper
type.

Step 2

Depending on your operating system, specify the paper size
and paper type from the Printing Preferences or Print dialog.

Note:

You can also change the settings on the printer control

panel. Navigate to:

Settings

Paper

Tray Conﬁguration

Paper Size/Type

For non

‑

touch

‑

screen printer models, press

to navigate

through the settings.

Make sure that the settings match the paper loaded.

Print the document.

Is the document printed on the correct paper?

The problem is
solved.

Go to step 3.

Step 3

Check if the trays are linked.

For more information, see

“Linking trays” on page 36

Print the document.

Is the document printed from the correct tray?

The problem is
solved.

Contact

customer

support

Troubleshooting

233

Summary of Contents for XC2235












































































































































































































































































































Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands

Lexmark XC2235, User Manual

Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands