Lexmark XC2235 User Manual Download

Page: 253 / 299

Cannot set up etherFAX

Action

Yes

Step 1

Check the printer connectivity.

Print the Network Setup Page. From the control panel, navigate
to:

Settings

Reports

Network

Network Setup Page

For non-touch-screen printer models, press

to navigate

through the settings.

Check the network status.

Is the printer connected to the network?

Go to step 3.

Go to step 2.

Step 2

Make sure that the printer is connected to a network and that the
network is connected to the Internet.

Can you set up etherFAX?

The problem is
solved.

Go to step 3.

Step 3

Make sure that etherFAX is set up correctly. For more information,
see

“Setting up the fax function using etherFAX” on page 64

Can you set up etherFAX?

The problem is
solved.

Go to

https://www.etherfa
x.net/lexmark

Cannot send or receive faxes using etherFAX

Action

Yes

Step 1

Make sure that the printer is connected to a network and that the
network is connected to the Internet.

Can you send or receive faxes using etherFAX?

The problem is
solved.

Go to step 2.

Step 2

From the control panel, navigate to:

Settings

Fax

Fax Setup

General Fax Settings

For non-touch-screen printer models, press

to navigate

through the settings.

Make sure that you have the correct fax number.

Make sure that Fax Transport is set to etherFAX.

Can you send or receive faxes using etherFAX?

The problem is
solved.

Go to step 3.

Troubleshooting

253

Summary of Contents for XC2235












































































































































































































































































































Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands

Lexmark XC2235, User Manual

Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands