Lexmark XC2235 User Manual Download

Page: 27 / 299

•

For FTP, type the FTP address. For example,

myServer/myDirectory

. Enter the FTP port. Port 21 is

the default port for sending commands.

•

For SMB, type the network folder address. For example,

myServer/myShare/myFile.pdf

. Type the

network domain name.

•

If necessary, select the Authentication type for FTP and SMB.

To limit access to the bookmark, enter a PIN.

Note:

The application supports the following ﬁle types: PDF, JPEG, TIFF, and HTML-based web pages.

Other ﬁle types such as DOCX and XLXS are supported in some printer models.

Click

Save

Note:

To manage bookmarks, click

Bookmark Setup

Creating folders

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Bookmark Setup

Add Folder

, and then type a unique name for the folder.

Note:

To limit access to the folder, enter a PIN.

Click

Save

Notes:

•

You can create folders or bookmarks inside a folder. To create a bookmark, see

“Creating bookmarks”

on page 26

•

To manage folders, click

Bookmark Setup

Managing contacts

Adding contacts

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Address Book

From the Contacts section, add a contact.

Note:

You can assign the contact to one or more groups.

Setting up and using the home screen applications

Summary of Contents for XC2235












































































































































































































































































































Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands

Lexmark XC2235, User Manual

Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands