Lexmark XC2235 User Manual Download | Manualshive

Page: 280 / 299

background image

Laser notice

The printer is certiﬁed in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for
Class I (1) laser products, and elsewhere is certiﬁed as a Class I laser product conforming to the requirements
of IEC 60825-1: 2014.

Class I laser products are not considered to be hazardous. The laser system and printer are designed so there
is never any human access to laser radiation above a Class I level during normal operation, user maintenance,
or prescribed service conditions. The printer has a non-serviceable printhead assembly that contains a laser
with the following speciﬁcations:

Class: IIIb (3b) AlGaInP

Nominal output power (milliwatts): 15

Wavelength (nanometers): 650–670

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Note:

Some modes may not apply to your product.

Mode

Description

Power consumption (Watts)

Printing

The product is generating hard

‑

copy

output from electronic inputs.

One-sided: 400 (CX421, MC2325, MC2425); 530 (CX522,
MC2535, XC2235); 580 (CX622, MC2640); 580 (CX625,
XC4240)
Two-sided: 280 (CX421, MC2325, MC2425); 360 (CX522,
MC2535, XC2235); 420 (CX622, MC2640); 420 (CX625,
XC4240)

Copy

The product is generating hard

‑

copy

output from hard

‑

copy original

documents.

425 (CX421, MC2325, MC2425); 485 (CX522, MC2535,
XC2235); 560 (CX622, MC2640); 540 (CX625, XC4240)

Scan

The product is scanning hard

‑

copy

documents.

25 (CX421, MC2325, MC2425); 28.5 (CX522, MC2535,
XC2235); 29.5 (CX622, MC2640); 28 (CX625, XC4240)

Ready

The product is waiting for a print job.

25 (CX421, MC2325, MC2425); 26.5 (CX522, MC2535,
XC2235); 28.5 (CX622, MC2640); 29.5 (CX625, XC4240)

Sleep Mode The product is in a high

‑

level

energy

‑

saving mode.

2.2 (CX421, MC2325, MC2425); 1.9 (CX522, MC2535,
XC2235); 1.8 (CX622, MC2640); 1.8 (CX625, XC4240)

Hibernate

The product is in a low

‑

level

energy

‑

saving mode.

0.2 (CX421, MC2325, MC2425); 0.2 (CX522, MC2535,
XC2235); 0.2 (CX622, MC2640); 0.2 (CX625, XC4240)

Off

The product is plugged into an electrical
outlet, but the power switch is turned
off.

0.2 (CX421, MC2325, MC2425); 0.2 (CX522, MC2535,
XC2235); 0.2 (CX622, MC2640); 0.2 (CX625, XC4240)

The power consumption levels listed in the previous table represent time-averaged measurements.
Instantaneous power draws may be substantially higher than the average.

Notices

280

«
...
278
279
280
281
282
...
»

Summary of Contents for XC2235












































































































































































































































































































Reviews:

No comments

Related manuals for XC2235

Brand: TallyGenicom Pages: 2

Document WorkCentre 480cx

Brand: Xerox Pages: 318

Brand: Xerox Pages: 76

Brand: Xerox Pages: 11

Brand: Xerox Pages: 352

Color 560 Printer

Brand: Xerox Pages: 2

Brand: Xerox Pages: 105

Brand: Xerox Pages: 42

Brand: Xerox Pages: 13

Brand: Xerox Pages: 132

CopyCentre C2128

Brand: Xerox Pages: 2

Brand: Xerox Pages: 20

Brand: Xerox Pages: 34

Brand: Xerox Pages: 8

Brand: Xerox Pages: 70

Brand: Xerox Pages: 124

Brand: Xerox Pages: 2

Brand: Xerox Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands