manualshive.com logo in svg

Lexmark XC2235, User Manual

The Lexmark XC2235 is a cutting-edge multifunction printer designed to streamline your office productivity. Enhance your workflow with this high-performance device that offers exceptional print quality, scanning capabilities, and fast printing speeds. You can easily access the comprehensive User Manual for the Lexmark XC2235 at 88.208.23.73:8080, providing step-by-step instructions and troubleshooting assistance—all available for free download.

Share
Download
background image

telephone number of the sending machine or such business, other entity, or individual. (The telephone number
provided may not be a 900 number or any other number for which charges exceed local or long-distance
transmission charges.)

See your user documentation in order to program this information into your fax machine.

Notice to users of the Canadian telephone network

This product meets the applicable Innovation, Science and Economic Development Canada technical
specifications.

The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to
a telephone interface. The termination of an interface may consist of any combination of devices subject only
to the requirement that the sum of the RENs of all the devices not exceed five. The REN is located on the product
label.

This equipment uses CA11A telephone jacks.

Avis réservé aux utilisateurs du réseau téléphonique du Canada

Ce produit est conforme aux spécifications techniques d’Innovation, Sciences et Développement économique
Canada.

Le numéro REN (ringer equivalence number : numéro d’équivalence de sonnerie) indique le nombre maximum
d'appareils pouvant être connectés à l’interface téléphonique. En bout de ligne, le nombre d’appareils qui
peuvent être connectés n’est pas directement limité, mais la somme des REN de ces appareils ne doit pas
dépasser cinq. Le numéro REN est indiqué sur l'étiquette produit.

Cet équipement utilise des prises de téléphone CA11A.

Notice to users of the New Zealand telephone network

The following are special conditions for the Facsimile User Instructions. The grant of a telepermit for any item
of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions
for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any
sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another
item of telepermitted equipment of a different make or model, nor does it imply that any product is compatible
with all of Telecom's network services.

This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.

This equipment may not provide for the effective hand-over of a call to another device connected to the same
line.

This equipment should not be used under any circumstances that may constitute a nuisance to other Telecom
customers.

This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for
which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances.

The decadic (or pulse) dialing on this device is unsuitable for use on the Telecom network in New Zealand.

For correct operation, the total of all the Ringer Equivalence Numbers (RENs) of all parallel devices connected
to the same telephone line may not exceed 5. The REN of this device is located on the label.

Notices

283

Summary of Contents for XC2235












































































































































































































































































































Reviews:

No comments

Related manuals for XC2235

Samsung SCX-3405FW Manual Del Usuario preview
SCX-3405FW
Brand: Samsung Pages: 347
Samsung SCX 6555N - MultiXpress Mono Multifunction Manual Del Usuario preview
SCX 6555N - MultiXpress Mono Multifunction
Brand: Samsung Pages: 180
Samsung SCX-4300 - SCX 4300 B/W Laser License Agreement preview
SCX-4300 - SCX 4300 B/W Laser
Brand: Samsung Pages: 18
Samsung SCX-4521FG - B/W Laser - All-in-One User Manual preview
SCX-4521FG - B/W Laser - All-in-One
Brand: Samsung Pages: 215
Samsung SCX 6320F - B/W Laser - All-in-One User Manual preview
SCX 6320F - B/W Laser - All-in-One
Brand: Samsung Pages: 332
Samsung SCX 4828FN - Laser Multi-Function Printer User Manual preview
SCX 4828FN - Laser Multi-Function Printer
Brand: Samsung Pages: 248
Samsung SCX 4725FN - B/W Laser - All-in-One User Manual preview
SCX 4725FN - B/W Laser - All-in-One
Brand: Samsung Pages: 253
Samsung ML 2851ND - B/W Laser Printer User Manual preview
ML 2851ND - B/W Laser Printer
Brand: Samsung Pages: 179
Samsung ML 2510 - B/W Laser Printer Manual Del Usuario preview
ML 2510 - B/W Laser Printer
Brand: Samsung Pages: 84
Samsung ML 1740 - B/W Laser Printer Manual Del Usuario preview
ML 1740 - B/W Laser Printer
Brand: Samsung Pages: 152
Samsung ML 1630 - B/W Laser Printer User Manual preview
ML 1630 - B/W Laser Printer
Brand: Samsung Pages: 142
Samsung ML 1630 - B/W Laser Printer Manual Del Usuario preview
ML 1630 - B/W Laser Printer
Brand: Samsung Pages: 82
Samsung SL-M2875FD Installation Manual preview
SL-M2875FD
Brand: Samsung Pages: 2
Samsung M337 User Manual preview
M337
Brand: Samsung Pages: 384
Samsung Lazett Combo SCX-4216F Service Manual preview
Lazett Combo SCX-4216F
Brand: Samsung Pages: 135
Samsung CLX-6260FD Manual Del Usuario preview
CLX-6260FD
Brand: Samsung Pages: 414
Samsung SCX 6555N - MultiXpress Mono Multifunction Administrator'S Manual preview
SCX 6555N - MultiXpress Mono Multifunction
Brand: Samsung Pages: 112
Samsung scx-4100 series Quick Install Manual preview
scx-4100 series
Brand: Samsung Pages: 2

Brands by name

Popular brands

Load more brands