manualshive.com logo in svg

Lexmark XC2235, User Manual

The Lexmark XC2235 is a cutting-edge multifunction printer designed to streamline your office productivity. Enhance your workflow with this high-performance device that offers exceptional print quality, scanning capabilities, and fast printing speeds. You can easily access the comprehensive User Manual for the Lexmark XC2235 at 88.208.23.73:8080, providing step-by-step instructions and troubleshooting assistance—all available for free download.

Share
Download
background image

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of
prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS
OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS
OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW
ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL
APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT
TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance
or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover
actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the
product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or
damage to real property or tangible personal property for which Lexmark is legally liable. 

IN NO EVENT WILL

LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER
ECONOMIC OR CONSEQUENTIAL DAMAGES.

 This is true even if you advise Lexmark or a Remarketer of the

possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's
and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers
are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or
limitation of incidental or consequential damages, so the limitations or exclusions contained above may not
apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Notices

292

Summary of Contents for XC2235












































































































































































































































































































Reviews:

No comments

Related manuals for XC2235

Canon iPF650 - imagePROGRAF Color Inkjet Printer Basic Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 40
Canon iP90 - PIXMA Color Inkjet Printer Easy Setup Instructions preview
iP90 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon iPF650 - imagePROGRAF Color Inkjet Printer Install Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 16
Canon iP100 - PIXMA Color Inkjet Printer Setup Instructions preview
iP100 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon imageRUNNER ADVANCE C5560 Configuration And Installation Manual preview
imageRUNNER ADVANCE C5560
Brand: Canon Pages: 67
Canon imageRUNNER 3300 Reference Manual preview
imageRUNNER 3300
Brand: Canon Pages: 366
Canon IMAGERUNNER ADVANCE C5051 Getting Started preview
IMAGERUNNER ADVANCE C5051
Brand: Canon Pages: 252
Canon iPF710 - imagePROGRAF Color Inkjet Printer Operations preview
iPF710 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 2
Ier I420 User Safety And Start Manual preview
I420
Brand: Ier Pages: 8
Samsung CJX-1050W Quick Install Manual preview
CJX-1050W
Brand: Samsung Pages: 2
TallyGenicom 6300 Series Maintenance Manual preview
6300 Series
Brand: TallyGenicom Pages: 175
Oce VarioPrint 6000 MICR series User Manual Operating Information preview
VarioPrint 6000 MICR series
Brand: Oce Pages: 264
Oce im2330 User Manual preview
im2330
Brand: Oce Pages: 194
Canon LBP-3200 Specifications preview
LBP-3200
Brand: Canon Pages: 4
Canon PIXMA MG3220 series Getting Started Manual preview
PIXMA MG3220 series
Brand: Canon Pages: 4
Canon LBP-800 Getting Started Manual preview
LBP-800
Brand: Canon Pages: 22
Canon Pixma G3020 Series Getting Started preview
Pixma G3020 Series
Brand: Canon Pages: 34
Canon Pixma MG3500 Series Getting Started Manual preview
Pixma MG3500 Series
Brand: Canon Pages: 3

Brands by name

Popular brands

Load more brands