Lexmark XC2235 User Manual Download

Page: 164 / 299

Erasing printer hard disk memory

From the control panel, navigate to:

Settings

Device

Maintenance

Out of Service Erase

Sanitize all information on hard disk

For non-touch-screen printer models, press

to navigate through the settings.

Depending on your printer model, select

ERASE

Continue

Follow the instructions on the display.

Note:

This process can take from several minutes to more than an hour, making the printer unavailable

for other tasks.

Encrypting the printer hard disk

This process erases all contents in the hard disk. If necessary, back up important data from the printer before
starting the encryption.

From the home screen, touch

Settings

Security

Disk Encryption

Start encryption

Follow the instructions on the display.

Notes:

•

To avoid loss of data, do not turn off the printer during the encryption process.

•

This process can take from several minutes to more than an hour, making the printer unavailable for
other tasks.

•

After encryption, the printer automatically restarts.

Restoring factory default settings

From the control panel, navigate to:

Settings

Device

Restore Factory Defaults

For non-touch-screen printer models, press

to navigate through the settings.

Select

Restore all settings

Statement of Volatility

Type of memory

Description

Volatile memory

The printer uses standard random access memory (RAM)
to buffer temporarily user data during simple print and
copy jobs.

Non-volatile memory

The printer may use two forms of non-volatile memory:
EEPROM and NAND (ﬂash memory). Both types are used
to store the operating system, printer settings, network
information, scanner and bookmark settings, and
embedded solutions.

Securing the printer

164

Summary of Contents for XC2235












































































































































































































































































































Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands

Lexmark XC2235, User Manual

Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands