Lexmark XC2235 User Manual Download

Page: 18 / 299

Lexmark CX522, CX622, MC2535, MC2640, and XC2235
MFPs

Use the

Display

•

View the printer messages and supply status.

•

Set up and operate the printer.

Home button

Go to the home screen.

Numeric keypad

Enter numbers or symbols in an input ﬁeld.

Power button

•

Turn on or turn off the printer.

Note:

To turn off the printer, press and hold the power button for ﬁve

seconds.

•

Set the printer to Sleep or Hibernate mode.

•

Wake the printer from Sleep or Hibernate mode.

Clear all or Reset button Reset the default settings of a function such as copying, faxing, or scanning.

Stop or Cancel button

Stop the current printer task.

Start button

Start a job, depending on which mode is selected.

Pause button

Place a dial pause in a fax number.

Backspace button

Move the cursor backward and delete a character in an input ﬁeld.

Indicator light

Check the printer status.

Volume buttons

Adjust the speaker volume.

Using the control panel

Summary of Contents for XC2235












































































































































































































































































































Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands

Lexmark XC2235, User Manual

Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands