Lexmark XC2235 User Manual Download

Page: 219 / 299

Mottled print and dots

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non-touch-screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Check the printer for leaked toner contamination.

Is the printer free of leaked toner?

Go to step 2.

Contact

customer

support

Step 2

From the control panel, navigate to:

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Check if the paper size and paper type settings match the
paper loaded.

Note:

Make sure that paper does not have texture or rough

ﬁnishes.

Do the settings match?

Go to step 4.

Go to step 3.

Step 3

Depending on your operating system, specify the paper size
and paper type from the Printing Preferences or Print dialog.

Note:

Make sure that the settings match the paper loaded.

Print the document.

Is the print mottled?

Go to step 4.

The problem is
solved.

Step 4

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Print the document.

Is the print mottled?

Go to step 5.

The problem is
solved.

Troubleshooting

219

Summary of Contents for XC2235












































































































































































































































































































Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands

Lexmark XC2235, User Manual

Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands