Lexmark XC2235 User Manual Download

Page: 227 / 299

Action

Yes

Step 3

Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting on the printer control
panel. Navigate to:

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Do vertical dark lines or streaks appear on prints?

Go to step 4.

The problem is
solved.

Step 4

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you use it.

Print the document.

Do vertical dark lines or streaks appear on prints?

Go to step 5.

The problem is
solved.

Step 5

Remove, and then insert the imaging kit.

Warning—Potential Damage:

Do not expose the imaging kit

to direct light. Extended exposure to light can cause print
quality problems.

Warning—Potential Damage:

Do not touch the

photoconductor drum under the imaging kit. Doing so may
affect the quality of future print jobs.

Print the document.

Do vertical dark lines or streaks appear on prints?

Contact

customer

support

The problem is
solved.

Horizontal white lines

Troubleshooting

227

Summary of Contents for XC2235












































































































































































































































































































Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands

Lexmark XC2235, User Manual

Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands