Lexmark XC2235 User Manual Download | Manualshive

Page: 276 / 299

background image

Notices

Product information

Product name:

Lexmark CX522ade, Lexmark CX522de; Lexmark CX622ade, Lexmark CX622de; Lexmark CX625ade,
Lexmark CX625adhe, Lexmark CX625de; Lexmark MC2425adw; Lexmark MC2535adw; Lexmark
MC2640adwe; Lexmark XC2235; Lexmark XC4240, Lexmark XC4240i

Machine type:

7529

Models:

081, 230, 238, 436, 486, 496, 636, 638, 686, 698, 836, 838, 898

Edition notice

February 2021

The following paragraph does not apply to any country where such provisions are inconsistent with local
law:

LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY

KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made
to the information herein; these changes will be incorporated in later editions. Improvements or changes in the
products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to
make these available in all countries in which it operates. Any reference to a product, program, or service is
not intended to state or imply that only that product, program, or service may be used. Any functionally
equivalent product, program, or service that does not infringe any existing intellectual property right may be
used instead. Evaluation and veriﬁcation of operation in conjunction with other products, programs, or services,
except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit

http://support.lexmark.com

.

For information on supplies and downloads, visit

www.lexmark.com

.

© 2018 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is deﬁned in 48
C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are
used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R.
227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software

Notices

276

«
...
274
275
276
277
278
...
»

Summary of Contents for XC2235












































































































































































































































































































Reviews:

No comments

Related manuals for XC2235

Brand: Panasonic Pages: 9

Brand: Panasonic Pages: 2

EasyCoder 501 SA

Brand: UBI Pages: 214

Brand: UBI Pages: 64

Brand: Unimark Pages: 36

Brand: POS-TECHNOLOGY Pages: 40

Brand: Xerox Pages: 20

Brand: ICT Pages: 34

Brand: Ricoh Pages: 44

Brand: Pantum Pages: 155

Brand: Ricoh Pages: 130

Brand: Canon Pages: 327

Brand: Epson Pages: 277

Brand: Epson Pages: 288

Brand: Epson Pages: 283

Brand: Epson Pages: 60

Brand: Dascom Pages: 100

Brand: Oce Pages: 198

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands