Lexmark XC2235 User Manual Download

Page: 28 / 299

If necessary, specify a login method to allow application access.

Apply the changes.

Adding groups

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Address Book

From the Contact Groups section, add a group name.

Note:

You can assign one or more contacts to the group.

Apply the changes.

Editing contacts or groups

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Address Book

Do either of the following:

•

From the Contacts section, click a contact name, and then edit the information.

•

From the Contact Groups section, click a group name, and then edit the information.

Apply the changes.

Deleting contacts or groups

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Address Book

Do either of the following:

•

From the Contacts section, select a contact that you want to delete.

•

From the Contact Groups section, select a group name that you want to delete.

Setting up and using the home screen applications

Summary of Contents for XC2235












































































































































































































































































































Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands

Lexmark XC2235, User Manual

Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands