Lexmark XC2235 User Manual Download

Page: 59 / 299

Sending an e-mail

Before you begin, make sure that the SMTP settings are conﬁgured. For more information, see

“Conﬁguring

the e

‑

mail SMTP settings” on page 51

Using the control panel

Load an original document into the ADF tray or on the scanner glass.

From the home screen, touch

E-mail

, and then enter the needed information.

If necessary, conﬁgure the output ﬁle type settings.

Send the e-mail.

Using a shortcut number

Create an e

‑

mail shortcut.

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Shortcuts

Add Shortcut

From the Shortcut Type menu, select

‑

mail

, and then conﬁgure the settings.

Apply the changes.

Load an original document into the ADF tray or on the scanner glass.

From the control panel, navigate to:

Shortcuts

‑

mail

For non-touch-screen printer models, press

to navigate through the settings.

Select the shortcut.

Send the e

‑

mail.

Creating an e-mail shortcut

Note:

You may need administrative rights to create a shortcut.

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Shortcuts

Add Shortcut

E-mailing

Summary of Contents for XC2235












































































































































































































































































































Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands

Lexmark XC2235, User Manual

Search results

Summary of Contents for XC2235

Reviews:

Related manuals for XC2235

Brands by name

Popular brands