Lexmark XC2235 User Manual Download | Manualshive

Page: 7 / 299

background image

Safety information

Conventions

Note

: A

note

identiﬁes information that could help you.

Warning

: A

warning

identiﬁes something that could damage the product hardware or software.

CAUTION

: A

caution

indicates a potentially hazardous situation that could injure you.

Different types of caution statements include:

CAUTION—POTENTIAL INJURY:

Indicates a risk of injury.

CAUTION—SHOCK HAZARD:

Indicates a risk of electrical shock.

CAUTION—HOT SURFACE:

Indicates a risk of burn if touched.

CAUTION—TIPPING HAZARD:

Indicates a crush hazard.

CAUTION—PINCH HAZARD:

Indicates a risk of being caught between moving parts.

Product statements

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord to

an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY:

Do not use this product with extension cords, multioutlet power strips,

multioutlet extenders, or UPS devices. The power capacity of these types of accessories can be easily
overloaded by a laser printer and may result in a risk of ﬁre, property damage, or poor printer
performance.

CAUTION—POTENTIAL INJURY:

Only a Lexmark Inline Surge Protector that is properly connected

between the printer and the power cord provided with the printer may be used with this product. The
use of non-Lexmark surge protection devices may result in a risk of ﬁre, property damage, or poor
printer performance.

CAUTION—POTENTIAL INJURY:

To reduce the risk of ﬁre, use only a 26 AWG or larger

telecommunications (RJ-11) cord when connecting this product to the public switched telephone
network. For users in Australia, the cord must be approved by the Australian Communications and Media
Authority.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not place or use this product near

water or wet locations.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.

Safety information

7

«
...
5
6
7
8
9
...
»

Summary of Contents for XC2235












































































































































































































































































































Reviews:

No comments

Related manuals for XC2235

Brand: Xerox Pages: 341

Brand: Panasonic Pages: 9

Brand: Panasonic Pages: 2

RS/6000 44P Series 270

Brand: IBM Pages: 216

Brand: Oki Pages: 222

Brand: Oki Pages: 4

Brand: Oki Pages: 160

Brand: Oce Pages: 222

WorkCentre Pro 32

Brand: Xerox Pages: 14

Brand: A&D Pages: 66

Brand: U-Line Pages: 18

Magicolor 4650DN

Brand: Konica Minolta Pages: 260

Brand: Avery Dennison Pages: 2

Brand: ICT Pages: 34

DYMO LABELWRITER 450 TURBO H-1265

Brand: U-Line Pages: 9

Brand: E-Pos Pages: 21

Brand: TransAct Pages: 45

NanoPrint LM210

Brand: Arrayit Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands