Loading paper and specialty media
Setting the size and type of the specialty media
The trays automatically detect the size of plain paper. For specialty media like labels, card stock, or envelopes,
do the following:
1
From the home screen, navigate to:
Settings
>
Paper
>
Tray Configuration
> select a tray
2
Configure the size and type of the specialty media.
Configuring Universal paper settings
1
From the home screen, touch
Settings
>
Paper
>
Media Configuration
>
Universal Setup
.
2
Configure the settings.
Loading trays
CAUTION—TIPPING HAZARD:
To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1
Pull out the tray.
Note:
Do not remove trays while the printer is busy.
2
Adjust the guides to match the size of the paper you are loading.
Note:
Use the indicators on the bottom of the tray to position the guides.
Loading paper and specialty media
22
Summary of Contents for XC6100 Series
