Lexmark XC9445 User Manual Download

Page: 121 / 504

Connect the ﬁnisher cable to the printer.

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Turn on the printer.

Add the ﬁnisher in the print driver to make it available for print jobs. For more information, see

“Adding available

options in the print driver” on page 79

Set up, install, and conﬁgure

121

Summary of Contents for XC9445

























































































































































































































































































































































































































































































































Search results

Summary of Contents for XC9445

Reviews:

Related manuals for XC9445

Brands by name

Popular brands

Lexmark XC9445, User Manual

Search results

Summary of Contents for XC9445

Reviews:

Related manuals for XC9445

Brands by name

Popular brands