Lexmark XC9445 User Manual Download

Page: 198 / 504

Click

Fax

Enable fax

Always display settings prior to faxing

, and then enter the recipient number.

If necessary, conﬁgure other fax settings.

Send the fax.

For Macintosh users

With a document open, choose

File

Print

Select the printer that has

‑

Fax

added after its name.

In the To ﬁeld, enter the recipient number.

If necessary, conﬁgure other fax settings.

Send the fax.

Scheduling a fax

Note:

Make sure that fax is conﬁgured. For more information, see the

Setting up the printer to fax

section.

Load an original document into the ADF tray or on the scanner glass.

From the home screen, touch

Fax

> enter the fax number >

Done

Touch

Send Time

, conﬁgure the date and time, and then touch

Send the fax.

Creating a fax destination shortcut

Note:

Make sure that fax is conﬁgured. For more information, see

“Setting up the printer to fax” on page 45

From the home screen, touch

Fax

Enter the recipient number, and then touch

Done

Touch

Create a shortcut.

Changing the fax resolution

Note:

Make sure that fax is conﬁgured. For more information, see the

Setting up the printer to fax

section.

Load an original document into the ADF tray or on the scanner glass.

From the home screen, touch

Fax

, and then enter the needed information.

Touch

Resolution

, and then select a setting.

Send the fax.

Fax

198

Summary of Contents for XC9445

























































































































































































































































































































































































































































































































Search results

Summary of Contents for XC9445

Reviews:

Related manuals for XC9445

Brands by name

Popular brands

Lexmark XC9445, User Manual

Search results

Summary of Contents for XC9445

Reviews:

Related manuals for XC9445

Brands by name

Popular brands