Network Card menu
To access the menu, navigate to either of the following:
•
Network/Ports
>
Standard Network
>
Standard Network Setup
>
Network Card
•
Network/Ports
>
Network [x]
>
Network [x] Setup
>
Network Card
Use
To
View Card Status
Connected
Disconnected
View the connection status of the wireless network adapter.
View Card Speed
View the speed of an active wireless network adapter.
Network Address
UAA
LAA
View the network addresses.
Job Timeout
0, 10–225 seconds
Set the time before the printer cancels a network print job.
Notes:
•
90 seconds is the factory default setting.
•
0 disables the timeout.
Banner Page
Off
On
Set the printer to print a banner page.
Note:
Off is the factory default setting.
TCP/IP menu
To access the menu, navigate to either of the following:
•
Network/Ports
>
Standard Network
>
Standard Network Setup
>
TCP/IP
•
Network/Ports
>
Network [x]
>
Network [x] Setup
>
TCP/IP
Note:
This menu is available only in network printers or printers attached to print servers.
Use
To
Set Hostname
Set the current TCP/IP host name.
Note:
This can be changed only from the Embedded Web Server.
IP Address
View or change the current TCP/IP address.
Note:
Manually setting the IP address sets the Enable DHCP and Enable Auto
IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on
systems that support BOOTP and RARP.
Netmask
View or change the current TCP/IP netmask.
Gateway
View or change the current TCP/IP gateway.
Enable DHCP
On
Off
Specify the DHCP address and parameter assignment.
Note:
On is the factory default setting.
Understanding the printer menus
160
