7
Close the access cover.
Installing a memory card
CAUTION—SHOCK HAZARD:
If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them off as well, and unplug any cables going into the printer.
Warning—Potential Damage:
Controller board electronic components are easily damaged by static
electricity. Touch something metal on the printer first before touching any controller board electronic
components or connectors.
An optional memory card can be purchased separately and attached to the controller board.
1
Access the controller board.
For more information, see
“Accessing the controller board” on page 27
2
Unpack the memory card.
Warning—Potential Damage:
Do not touch the connection points along the edge of the card. Doing so
may cause damage.
Additional printer setup
31
