Incompatible tray [x] [59]
Try one or more of the following:
•
Remove the indicated tray.
•
From the printer control panel, touch
Continue
to clear the message and continue printing without
using the indicated tray.
Incorrect paper size, open [paper source] [34]
Try one or more of the following:
•
Load the correct size and type of paper in the tray, and then specify the paper size and type in the
Paper menu on the printer control panel.
•
Make sure the correct paper size and type are specified in Print Properties or the Print dialog settings.
•
Check if the paper size is correctly set. For example, if MP Feeder Size is set to Universal, then make
sure the paper is large enough for the data being printed.
•
Check the length and width guides and make sure the paper is loaded properly in the tray.
•
From the printer control panel, touch
Continue
to clear the message and print using a different tray.
•
Cancel the print job.
Insert Tray [x]
Insert the indicated tray into the printer.
Install Tray [x]
Try one or more of the following:
•
Install the specified tray:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Install the specified tray.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.
•
Reset the active bin.
Insufficient memory to collate job [37]
Try one or more of the following:
•
From the printer control panel, touch
Continue
to print the part of the job already stored and begin
collating the rest of the print job.
•
Cancel the current print job.
Troubleshooting
271
