Note:
If you do not have a replacement imaging unit, then see the “Ordering supplies” section or go to
Replace wiper
Try one or more of the following:
•
Replace the fuser wiper in the printer.
•
Touch
Continue
to clear the message and continue printing.
Restore held jobs?
Try one or more of the following:
•
From the printer control panel, touch
Restore
to restore all held jobs stored in the printer hard disk.
•
From the printer control panel, touch
Do not restore
if you do not want to restore any of the print jobs.
Scan document too long
The scan job exceeds the maximum number of pages. Touch
Cancel job
to clear the message and cancel
the scan job.
Scanner automatic feeder cover open
Close the ADF cover.
Scanner disabled by admin [840.01]
Print without the scanner, or contact your system support person.
Scanner disabled. Contact system administrator if problem
persists. [840.02]
Try one or more of the following:
•
Touch
Continue with scanner disabled
to return to the home screen, and then contact your system
support person.
•
Touch
Reboot and automatically enable scanner
to cancel the job.
Note:
This attempts to enable the scanner.
Scanner jam access cover open
Close the bottom ADF access cover to clear the message.
Scanner jam, open and close automatic feeder top cover [2yy.xx]
Remove the jammed paper from the ADF cover.
Troubleshooting
280
