14
_______________________________________________________
Operation and Care
Auto Operation: (Upgraded Option)
Auto-Fill™ Models:
Automatic Auto-Fill™ cycle:
Water will automatically turn-off when optimal water level is detected by 2 sensors It is followed with the
immediate start of Whirlpool jet for a duty cycle of thirty (30) minutes. The Auto-Fill™ cycle is safely
protected by 2 sensors, 3-minute time out and can be extended with a manually operative shut-off valve
located at the front panel.
Please note: The 3-minute time out is designed for overflow protection in case of an emergency.
If water flow rate is too weak due to current plumbing, you may notice the water stops before reaching
water sensor. This is because the 3-minute time out has been activated. To continue filling, turn the
Auto-Fill knob clockwise.
Manual conversion:
Auto-Fill™ option can be simply reset to normal manual mode as a contingent system when automatic
operation becomes unavailable. Please call our Customer care for step by step instructions.
Panel Functional Switches & Operating Instructions:
Hot/Cold water faucet located at the center of the front panel.
1.1 Use faucet knob to adjust optimal water temperature at “H” (Left) or “C” (Right) directory.
1.2 Pull out and tilt down faucet knob to shut off water any time during the automatic or manual
operational cycle.
Warning
Must be used when spa chair is left unattended or for overnight procedures to
shut off water supply to basin.
Important!
Must scrub and clean water sensors frequently to ensure that water stops right
at sensor level. If necessary, clean using sponge buffer.
