19
_______________________________________________________
Operation and Care
NOTE : If the Massage Chair is not provided, then the end-user will need to install a UL listed and cUL/CSA
certified massage chair with
a suitable Class 2 Power Supply.
TOP MASSAGE CHAIR BASIC INSTALLATION INSTRUCTIONS:
Fig.1
Fig.3
Fig.2
Controller PCB
Install seat cushion with 2 screw-Knobs
Lever the back massage and secure 2 hinge
screws onto the metal brackets.(Do not turn
the screws all the way in )
Leave 1/4” thread screw head for sliding
Install back shell with 4 screws as Fig.3
Drill 4 mounting holes ½”.Width=16.5”
Length=11 .Install seat frame and secure 4
screws from bottom base.Using the provided
stand-off to adjust the height of seat frame as
needed to allow seat frame to travel freely.
Lift up back massage to engage
locking device. (Manually adjust
actuator rod to lock as needed)
Install back cushions.
Plug AC cord to power strip
Located inside of the tub base.
