background image

LEXUS GENUINE DASH CAMERA 

QUICK START GUIDE

Audio On/Off 

switch

Action 

button

Error Light

Micro SD 

memory 

card slot

Recording Light

MICRO SD MEMORY CARD

Note that the included micro SD card 
must be inserted into the camera for it 

 

to function.

AUTOMATIC RECORDING

Once activated, video and audio are 
continuously recorded until the ignition 
is turned off and the footage is saved on 
the micro SD card. When the micro SD 

 

card  is  full,  the  oldest  video  files  are  
then overwritten.

INCIDENT RECORDING

In the event of an abnormal shock when 
driving, Incident Recording mode is activated 
automatically, protecting the video footage for 
the 12 seconds before impact and the 8 seconds 
immediately after on the camera’s micro SD card.  
No driver action is required.

PARKING

 SURVEILLANCE

If the vehicle is struck while parked, even if it 
is powered off, Parking Surveillance mode will 
automatically record for up to 60 seconds 
following  the  impact  and  the  file  will  be 
protected on the micro SD card. No driver 
action is required.

AUDIO

 SWITCH

Audio recording can be disabled or enabled 
using the Audio On/Off switch.

INTERESTING

 EVENT 

RECORDING

To capture interesting events during 
your travels, quickly push the Action 
button on the camera. The camera will 
automatically protect the past 12 seconds 
and the following 8 seconds to the 

 

micro SD card.

ADVENTURE

 MODE

To capture and protect long stretches of 
video/audio while driving, push and hold 
the Action button on the camera until the 
camera emits three short, high-tone beeps 
(typically 1 second). Up to 87 approximate 
minutes of footage will be automatically 
protected.

To turn Adventure mode off, push and hold 

the Action button again until three short, 
high-tone beeps are emitted.

Industrial Grade 

Memory Card

Your Lexus Dash Camera automatically 
begins recording when the vehicle’s ignition 
power is turned on, so no other action is 
required. When the green light stays on,  
the system is activated. A short, high-tone 
beep indicates that startup is complete.

Reviews: