Lexus LX 470 Owner'S Manual Download | Manualshive

Page: 227 / 369

background image

STARTING AND DRIVING

211

FOUR−WHEEL DRIVE SYSTEM

(a) Four−wheel drive control

31X013d

Use the four−wheel drive control lever and center
differential lock button to select the following transfer and
center differential modes.

The “H” and “L” position of the four−wheel drive control lever
provides either lock or unlock mode of the center differential
depending on the center differential lock button position.

Use the center differential lock system if your wheels get stuck
in a ditch, or when you are driving on a slippery or bumpy
surface. When the center differential is locked, the vehicle skid
control system is automatically turned off and the center
differential lock and “VSC OFF” indicator lights come on
because the function that controls engine performance
interferes with the process of freeing your wheels.

NOTICE

As soon as the center differential lock switch is turned
on, the “VSC OFF” indicator light comes on. After the
wheels are out of the ditch or off the slippery or bumpy
surface, turn the center differential lock switch off.
Make sure the center differential lock indicator light and
vehicle skid control system off indicator light turn off.

”H” (high speed position, center differential unlocked):
Lever at ”H”, center differential lock button left out

Use this for normal driving on all types of roads, from dry
hard−surfaced roads to wet, icy or snow−covered roads. This
position gives greater economy, quietest ride, least wear and
better vehicle control.

”H” (high speed position, center differential locked):
Lever at ”H”, center differential lock button pushed in

Use this for greater traction when you experience a loss of
power, such as wheel slipping, in the center differential unlock
mode.

”N” (neutral position): Lever at ”N”

No power is delivered to the wheels. The vehicle must be
stopped.

«
...
225
226
227
228
229
...
»

Summary of Contents for LX 470


















































































































































































































































































































































































Reviews:

No comments

Related manuals for LX 470

Brand: AC Schnitzer Pages: 16

Brand: Raven Pages: 24

Brand: Weather Guard Pages: 4

Brand: Harken Hoister Pages: 12

Brand: Yamaha Pages: 2

Brand: Jabra Pages: 10

Brand: Taffio Pages: 8

Brand: Porsche Pages: 144

Brand: Conrad Pages: 26

2003 Thunderbird

Brand: Ford Pages: 200

Brand: Alpine Pages: 2

Brand: Whispbar Pages: 15

Brand: Ford Pages: 22

Brand: STC Pages: 6

Brand: Volvo Pages: 10

Brand: Opel Pages: 32

Brand: KEKO Pages: 3

Brand: Movon Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands