33
Fill Adjustment
Gear
Grease nipple
located next to the
Fill Adjustment Gear
(open right-hand
side panel door)
Inspect after every 3
months or 100,000
tablets and apply if dry.
NLGI Grade 2
Tooling Heads
Heads of Upper
Punches and Lower
Punches
Inspect and apply when
dry.
NLGI Grade 1
Tooling
Air-tight container
Cover and store in oil
after cleaning.
Mineral oil
Tooling Barrels
The main shaft of the
Upper Punches and
Lower Punches
Lubricate every time
Tooling is installed in
the press.
SAE 10
Gearbox
On the Gearbox
Inspect after every 3
months.
460 Grade Worm Gear
Oil
Part
Location
Image
Frequency
Type of Lubricant