iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
150
3.3.7.2
Station Group Attributes
– PGM 191
Each type of group has a different set of available attributes relating to announcements, timers, overflow, etc.
Table 3.3.7.2-1 through Table 3.3.7.2-8 provides descriptions for the attributes, LCD displays and data entries
required.
The attributes for the Circular and Terminal Hunt groups are given in Table 3.3.7.2-1 and the UCD attributes
include the ACD functions Table 3.3.7.2-2. In addition, there are no attributes for a group assigned as a Net
VM group in PGM 190.
PROCEDURE
STATION GRP ATT
ENTER GRP NO(401-440)
Press the
[PGM]
button and dial 191.
CIRC GRP 401
PRESS FLEX KEY (01-21)
Use the dial pad to enter the desired Station Group. The system will display
the type of group from the Station Group Assignment PGM 190 data (Ex. 01
Circular).
Press the Flex button for the desired attribute; refer to Table 3.3.7.2-1 to
Table 3.3.7.2-8.
Use the dial pad to enter the desired Group Attributes data, refer to Table
3.3.7.2-1 to Table 3.3.7.2-8.
Press the
[Save]
button to store the data entry.
Table 3.3.7.2-1 STATION GROUP
— CIRCULAR & TERMINAL GROUPS (PGM 191)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
CIRC 401 ANNC 1 TMR(1s)
(000 - 999) : 015
If all stations in the group are busy when a
call is offered, the call may continue to wait
(queue) for an available station.If the queue
period exceeds 1stAnnouncementTimer, the
call may be sent to a VSFannouncement.
If the timer is set to 000, the call will receive
the first announcement, in full, prior to the
hunt process (guaranteed announcement).
000~999
seconds
015
2
CIRC 401 ANNC 2 TMR(1s)
(000 - 999) : 000
After the 1st announcement, the 2nd ANNC
TMR is activated. At expiration, if the call
remains queued to the group, the call is sent
to the assigned 2nd VSF announcement.
000~999
seconds
000
3
CIRC 401 ANNC1 LOC
VSF ANNC .. (01
– 70)
The Station Group can be assigned an
announcement, which is played if the call
remains queued beyond the ANNC 1 TMR
duration. The announcement location is the
VSF ANNC1 number. An entry of 00
indicates no announcement. Including ‘#’ at
the end of an entry instructs the system to
disconnect after the announcement.
01~70
00: none