iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
20
Table 3.3.2.1-1 SYSTEM IP ADDRESS PLAN (PGM 102)
BTN
DISPLAY
DEFAULT
REMARK
6
SYSTEM SUB NET MASK
255.255.255.0
255.255.0.0
7
AUTOMATIC IP ASSIGN
(1:ON/0:OFF): ON
ON
The system will automatically assign IP
addresses to modules and terminals (ON) or,
when OFF, IP addresses are assigned manually
in PGM 103 Device IP Address Plan.
8
SECOND SYS IP ADDRESS
0 .0 .0 .0
0.0.0.0
When devices are located on a different private
address on the same net, enter the MPB IP
address for the second LAN.
9
SECOND SYS SUB NET MASK
255.255.255 .0
255.255.255.0
10
FIREWALL IP ADDRESS
0 .0 .0 .0
0.0.0.0
When the system is installed behind a NAPT
server, the fixed IP Address provided by the
NAPT server must be assigned in this field.
Also, use this IP address for the MPB address in
remote devices.
11
FIRST START MAC ADDR
000000000000
00.00.00.0
0.00.00
A range of MAC addresses can be entered to
register devices. This entry is the start address
of the first range.
12
FIRST END MAC ADDR
000000000000
00.00.00.0
0.00.00
A range of MAC addresses can be entered to
register devices. This entry is the end address of
the first range.
13
SECOND START MAC ADDR
000000000000
00.00.00.0
0.00.00
A range of MAC addresses can be entered to
register devices. This entry is the start address
of the second range.
14
SECOND END MAC ADDR
000000000000
00.00.00.0
0.00.00
A range of MAC addresses can be entered to
register devices. This entry is the end address of
the second range.
15
SYSTEM IP ADDRESS PLAN
SYSTEM RESET
Returns System IP Address Plan to default
values.
16
MPB DNS IP ADDR
0 .0 .0 .0
0.0.0.0
IP Address of Domain Name Server, which
iPECS will use to resolve URL to an IP address.
The DNS provides the resolution after receiving
the name from iPECS.
17
MPB DHCP
(1:ON/0:OFF) : OFF
OFF
Enable/Disable DHCP client function for the
MPB.