iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
452
4.4.7.7
Prefix Dialing Table - PGM 206
Selecting ISDN Prefix Dialing Attributes will display the Prefix Dialing Table Attributes data entry page.For
convenience, the copy, paste, and drag is available to enter or modify data.Click
[Save]
button after changing
Value.
Figure 4.4.7.7-1 Prefix Dialing Table Attributes
Prefix Dialing Table. With this table, three features can be supported.
CO Call Charge with NPR metering.
SIP direct dialing with no wait inter-digit timer.
ISDN Prefix Call
– ISDN en-block Dialing with Prefix Call Setup.
If first some digits (up to 8 digits) of outgoing dial number are matched with Prefix Code of each table, this
table can start work. By each Co-line (PGM 142 – F20), Table ID (0-6) can be set. This table ID (PGM 142 –
F20) is associated with PGM 206 – each table ID.
Table 4.4.7.7-1 Prefix dialing Table Attributes
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Prefix Code
Enter the Prefix code. (Max 8 digits)
Max. 8 Digits(Include * and #)
Refer to
description
Table ID
Enter Table ID (0-6). 0 means NOT used.
0-6
0
Min Digit
Select the minimum dial digits (00-30).
00-30
0
Max Digit
Select the maximum dial digits (00-30).
00-30
0
Number Of
Type
Select Number of Type (0~6).
Unknown
International
National
Network Spec
Subscriber
Abbreviated
Reserved.
Refer to
description
Unknown
