iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
41
Table 3.3.3.2-3 STATION ATTRIBUTES III (PGM 113)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
2
100-110 VSF ACCESS
(1:EN/0:DIS) : ENABLE
Permits station access to the built-in AA/VM.
0: Disable
1: Enable
Enable
3
100-110 GROUP LISTEN
(1:EN/0:DIS) : DISABLE
Enables Group Listen feature, audio is sent
to both the handset and speaker with the
handset microphone active and
speakerphone microphone OFF.
0: Disable
1: Enable
Disable
4
100-110 OVERRIDE
(1:EN/0:DIS) : DISABLE
Enables intrusion to gain access to an active
CO/IP call.
0: Disable
1: Enable
Disable
5
100-110 SMDR HIDE
(1:EN/0:DIS) : DISABLE
Enables hiding dialed digits in SMDR output.
0: Disable
1: Enable
Disable
6
100-110 VOICE OVER
(1:EN/0:DIS) : ENABLE
Enables use of Voice Over by station.
0: Disable
1: Enable
Enable
7
100-110 PRIME LINE
(1:HOT/0:WARM) : WARM
Enables Delayed Prime Line (Idle Line)
activation, see PGM 121, Idle Line Selection
and PGM 182-button 6 for Prime Line timer.
0: WARM
1: HOT
WARM
8
100-110 ALARM/DOORBEL
(1:EN/0:DIS) : DISABLE
Assigns station to receive Alarm/Doorbell
signal.
0: Disable
1: Enable
Disable
9
100-110 CALL WAIT
(0-3) : For Ext/Int
When a busy station receives a call, the call
may queue to the station instead of receiving
busy tone. With Call Wait, the caller will hear
Ring-back and the user sees the CO line
LED flash.If this option is set to a station, and
a co-line is ring assigned to the station,
second ring assigned call CLI will show in the
station’s LCD.
0: OFF, 1:For External/Internal
2:For External, 3:For Internal
Refer to
description
For
External
/Internal
10
100-110 LEFT MSG EXEC
(1:ON/0:OFF ) : ON
When a call is forward to theSecretary of an
Executive/Secretary pair, messages can
beleft for the Executive (ON) orSecretary
(OFF).
0: OFF
1: ON
ON
11
100-110 E&MIC HEADSET
(1:ON/0:OFF ) : OFF
Select E&MIC Headset mode.
0: OFF
1: ON
OFF