iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
624
4.5.16 Trace
The system software incorporates routines to monitor and output detailed call and feature processing
information, and event logs. Information is provided on a system or device level as requested.Administrators
can find the information on this page.
[eMG80/100, eMG800]
[UCP]
Figure 4.5.16-1 Trace Main Page
We explain [Packet Capture] and [Trace Log via web] among them because it is very useful to use Web
admin.
Packet Capture
A user can start and stop capturing packets and download packet capture result. The dump file will be
replaced when new capturing is started.
Default option is included.The file name is packetdump.cap. -i eth0 -w packetdump.cap -c 10000
Option explanation
protocol filter: tcp or udp or icmp
port filter: both source and destination port -> port #number, source port -> src port #number, destination port -
> dst port #number
IP filter: both source and destination host IP -> host #IP_ADDR, source host IP -> src host #IP_ADDR,
destination host IP -> dst host #IP_ADDR
# Example) UDP and Port 5588 and Source IP address 10.1.1.100: udp and port 5588 and src host
10.1.1.100