iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
48
Table 3.3.3.3-1 STATION ISDN ATTRIBUTES (PGM 114)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
12
100-110 MSN WAIT
(1:ON/0:OFF ) : OFF
When a call that is corresponding to a MSN
Telephone Number comes in to system, the
call is basically routed to idle stations that
have free MSN button that is assigned for
the corresponding Telephone Number. And
also the call can be routed to busy stations
in the following condition.
OFF :
if a keyset is in a busy status, cannot
receive incoming MSN Telephone Number
corresponding call even though it has a
free(idle) corresponding MSN LOOP Button
ON :
if a keyset is in a busy status, can
receive incoming MSN Telephone Number
corresponding call if it has a free(idle)
corresponding MSN LOOP Button
0: OFF
1: ON
OFF
14
100-110 DID RESTRICT
(1:ON/0:OFF ) : OFF
Enable station receive DID call.
0: OFF
1: ON
OFF
15
100-110 DISA RESTRICT
(1:ON/0:OFF ) : OFF
Enable station receive DISA call.
0: OFF
1: ON
OFF
17
100-110 MODEM ENABLE
(1:ON/0:OFF ) : OFF
It is used to set modem attributes.
0: OFF
1: ON
OFF
18
100-110 FAST XFER CLI
(1:ORI/0:TRN ) : TRN
If a user transfers a CO call with CLI to SLT
or DECT, CO CLI can be seen instead of
station number when this option is set to
ORI.
0: TRN
1: ORI
TRN
20
100-110 PICKUP BY BTN
(1:ON/0:OFF ) : ON
It is used to set pick up by flex button.
0: OFF
1: ON
ON
21
100-110 MULTI LANG
(1-6):PROMPT1 A.AMERICA
Selected language prompt is played to the
user when accessing the VMIU or VMIB.
The range is as below
1: US , 2:KOREA , 3:TURKIYE
4:RUSSIA , 5:AUTRALIA, 6:GERMANY
Refer to
description
1
22
100-110 P-MSG DND
(1:ON/0:OFF) : OFF
If it is ON, the pre-selected
station doesn’t
receive the ring and the caller hears DND
tone.
0: OFF
1: ON
OFF