iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
52
3.3.3.4
Flexible button Assignment -PGM 115
Each Flex button for each iPECS IP and LDP Phone, and DSS Console is assigned a function (Type) and an
associated Value as shown in Table 3.3.3.4-1.
For assignments to an DSS Console, the
[VOL UP]
/
[VOL DOWN]
buttons shift the Flex button appearance on
the Admin station to the next or previous group of 24 buttons as they appear on the iPECS DSS Console.
When multiple DSS Consoles are associated with a station,
[VOL UP]
/
[VOL DOWN]
are used to access and
assign a function to the console buttons. Each console contains entries for 48 buttons even though the
console may only have 12 buttons. In this case, assignments for buttons 13 to 48 are ignored.
Table 3.3.3.4-2 shows the default button assignments for the iPECS IP and LDP Phones and Table 3.3.3.4-3
and Table 3.3.3.4-6 provides default assignment for the various DSS Console button maps.
PROCEDURE
FLEX BUTTON ASSIGN
ENTER STA RANGE
Press the
[PGM]
button and dial 115.
100-110 BTN ASSIGN
PRESS FLEX_KEY (1-24)
Use the dial-pad to enter a station range (Ex. 100~110). For a single
station, enter the same number twice.
Press the desired Flex button (1~24).
Use the dial-pad to enter the desired button TYPE (1~6) and value, if
required.
Refer to Table 3.3.3.4-1 for types and value range.
Defaults for the iPECS IP and LDP Phones are shown in Table
3.3.3.4-2, for DSS Console defaults refer to Table 3.3.3.4-3.
In addition, for the DSS Console, use
[VOL UP]
/
[VOL DOWN]
buttons to
access the next/previous 24 flex buttons.
Press the
[Save]
button to store the Flex button data entry.
Table 3.3.3.4-1 FLEX BUTTON TYPE & VALUE CODES (PGM 115)
TYPE
DESCRIPTION
Remarks
1
Empty Button
Empty (unassigned) button, may be defined by the user.
2
User Program Fixed Numbering
Plan
Assigns button to perform a User Program function from the
Fixed Numbering Plan, Appendix A.
3
{[SPEED] XXX}
Station or System Speed Dial bin.
4
Flexible Numbering Plan Code
Assigns button to dial a code from the Flexible Numbering Plan,
see Appendix B.
5
Station or Network Station
Assign network station number from network table.
6
MSN
Enter desired MSN Table index.
7
U-LOOP
U-Loop button for call wait of internal & external call
