6.4 Enter device PIN CODE(PASSWORD)
** ENTER PIN CODE **
CODE :
EXIT DEL OK
1. The desired bluetooth device requests to enter the
pincode of it.
(The Bluetooth Passcode is a 1 to 16 character-
long
numeric code. )
2. Enter the pincode and send to headset by pressing
[OK] or [Hold/Save].
3. When the connection has been established,
the device shows connected to followed by the
device's name and address.
( Note that you can have only one active connection
at a time. )
4. If the connection is failed, you can try to connect
device again.
5. Once the headset and LDP-9000BTU have
successfully paired, you are ready to place and
receive calls. (see section 9, 10.)
7. UNPAIRING
INITIALIZE DEVICE
ARE YOU SURE?
EXIT BACK OK
1. If you want use another headset,
you can erase paired information and pair with the
another headset desired
2. It will take a few seconds to erase paired
information.
3. If it is unpaired already,
it will display “UNPAIRING FAILED”
