LIP-8002/8002A
iPECS
Installer
Guide
27
Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
Changing the Domain requires a reboot of the IP Phone; when you leave the menu, you
will receive a reboot notice. The IP Phone must reboot to utilize the new values
entered.
To enter alphanumeric characters select the
Mode
button. Refer to
Appendix E
for the
character mapping of dial pad digits.
3.6 Phone Settings
Under the
Phone Settings
menu item the user parameters listed below can be changed.
-
LCD
contrast
-
Ring
setting
-
Ringer
Off
-
Flexible button settings
-
Time
Configuration
-
S/W
Update
-
Outgoing Call Lock
-
Speed Number Dialing
-
Key
Tone
-
Language
With the exception of S/W Update and Outgoing Call Lock, these settings are not password
protected. The user may access these parameters even if the LCD Configuration Menu is
locked.
3.6.1 LCD Contrast
The contrast of the LCD is adjustable for best viewing angle.
To adjust the LCD contrast:
Press the Settings (
) button.
Press the
digit, or move the cursor to
3.Phone Settings
using the navigation buttons and
press the
OK
button.
Press the
digit, or move the cursor to
1.LCD Contrast
using the navigation buttons and
press the
OK
button.
Press the
Down
navigation button to decrease the contrast, or press the
Up
navigation
button to increase the contrast.
Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
