LIP-8002/8002A
iPECS
Installer
Guide
34
Press the
digit, or move the cursor to
2.TFTP Server Address
using the navigation
buttons and press the
OK
button.
Input the TFTP Server Address using the dial pad, and press the
OK
button to save your
entry.
Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
Changing the TFTP address requires a reboot of the IP Phone; when you leave the
menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new
values entered.
3.6.6.3 HTTPS Provisioning
The HTTP/HTTPS server URL is a required parameter for HTTP/HTTPS provisioning. Normally,
HTTP employs TCP port 80, and HTTPS employ port 443. In addition, if required by the
HTTP/HTTPS server for authentication, a Username and Password are assigned.
When using HTTPS, the server must support SSL (Secure Sockets Layer) for proper
operation.
3.6.6.3.1
Provisioning URL
The Provisioning URL is the URL of the HTTP/HTTPS server.
To assign the provisioning server URL:
Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to
section 3.3
.
Press the
digit, or move the cursor to
3.Phone Settings
using the navigation buttons and
press the
OK
button.
Press the
digit, or move the cursor to
6.S/W Update
using the navigation buttons and
press the
OK
button.
Press the
digit, or move the cursor to
3.HTTPS Provisioning
using the navigation
buttons and press the
OK
button.
Press the
digit, or move the cursor to
1.Provisioning URL
using the navigation buttons
and press the
OK
button.
Input the provisioning server URL using the dial pad and press the
OK
button to save the
entry.
Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
Changing the provisioning server URL requires a reboot of the IP Phone; when you
leave the menu, you will receive a reboot notice. The IP Phone must reboot to utilize
the new values entered.
To enter alphanumeric characters select the
Mode
button. Refer to
Appendix E
for the
character mapping of dial pad digits.
