LIP-8002/8002A
iPECS
Installer
Guide
54
o
Call Waiting Function, when enabled, visually notifies the user of an incoming call
while in a conversation. If disable, when in a conversation, a new call is refused
and the call server routes the call.
o
Call Waiting Tone, when the IP Phone is in use with call waiting enabled, a beep
tone delivered over the existing call indicates an incoming call.
o
Call Hold Ringback, when enabled, rings the phone if the user returns to idle with
a call on hold.
o
Message Waiting Tone, when enabled, stutter dial tone notifies the user a new
message is waiting. Stutter dial tone notification is in addition to the visual flashing
Message LED notification.
o
Auto
Answer, when enabled, will activate the speakerphone automatically if an
incoming call is received.
-
Call
Forwarding
o
Conditions define the condition for Call Forward (Busy, No-Answer, unconditional,
or not used).
o
Address
to
Forward defines the destination to receive forwarded calls.
-
Direct Call (Hotline/Warm-Line)
o
Direct
Call, when enabled, places a call to a predefined destination automatically
when the phone goes off hook.
o
Direct
Call
Number defines the destination for a direct call.
o
Direct
Call
Timer sets a delay timer for Warm-Line operation. The timer specifies
the period before placing a direct call. The timer is set in 1 second increments
from zero (0) to ten (10) seconds. For Hotline operation, set the timer to zero (0)
seconds.
To modify parameters on the Call Preferences screen:
Select the desired parameter and enter new values, or select values from the drop-down
menus.
When complete, select the
button to load new values to the IP Phone memory.
