LIP-8002/8002A
iPECS
Installer
Guide
3
Number Function
Left
button - Move to the previous menu in the settings menu.
Right
button
Up
button - When the phone is in the idle state, accesses the call log.
1
Down
button - When the phone is in the idle state, accesses the
phonebook.
2
OK
button - Select a current item or save a value in the settings menu.
Retrieve a hold Call
button (In Hold State) - Use to retrieve a hold call.
3
Settings
button - ‘Settings’ accesses and exits the menu for display
and changes to the IP Phone configuration.
4
Redial
button - Use to dial the last number dialed.
5
Mute
button - Toggle audio from the microphone to the connected
party On and Off.
6
Volume control
button - Use to adjust Ring, Handset, and Speaker
volume.
7
Speakerphone
button - Toggle the IP phone speakerphone On and
Off.
8
Mode
button (In Editing State) - Use to switch the input mode can
accept an alphanumeric entry.
Forward
button (In Idle State) - Use to set the call forwarding
configuration.
Transfer
button (In Call State) - Use to transfer the current active call.
9
Delete
button (In Editing State) - Use to delete a letter in front of the
cursor or clear an entire string.
Conference
button (In Call State) – Use to initiate, cancel or join the
conference call.
10
Flexible
buttons - Assign as feature in Phone configuration. Refer to
section 3.6.5
under Flexible Button Setting for instructions on defining
flexible buttons.
11
Dial pad
buttons (In Editing State)- Use to dial a number, select a
menu item, or input a value.
