Wireless SOHO
Installation and Operation Manual
38
3.12 Allowed/Denied Number
Description
Allow/Deny list has 50 codes and each code can contain up to 20 Digits. This list is applied to the user with
Outside Line access restrict (Menu + 1 5 1) enabled. As digits are dialed, they are compared to entries
using the following rules to allow or deny the call.
Rule 1
– If a table has no entries, no restrictions are applied.
Rule 2
– If there are only Deny entries, restrictions are provided as Deny only.
Rule 3
– If there are only Allow entries, restrictions are provided as Allow only.
Rule 4
– If there are both Allow and Deny entries, the Deny entries are searched. If the dialed number
matches a Deny entry, the call is restricted; if no match is found the call is allowed.
This feature is not applied to System Speed numbers 200~399”. Therefore, the user can make a call with
System Speed nu
mber 200~399” with no restriction.
Programming
C
ONFIGURATION
Outside Line Access Restrict
–
[Menu]
+ 1 5 1
Allowed Numbers
–
[Menu]
+ 3 2
Denied Numbers
–
[Menu]
+ 3 3
3.13 MOH (Music-On-Hold)
Description
When a call is placed on hold, the system will deliver a recorded message from VSF or the default MOH
tone. In this way, the connected user can determine that the connection is still active.
The base station records the VSF message for MOH. If a message is not recorded, the default MOH will
be delivered.
Operation
LWS-BS station
To record a VSF message for MOH:
1.
Press the
[Menu]
button.
2.
Dial 2 4.
3.
Dial „#‟.
4.
After the record prompt and beep-tone, record message.
5.
Press the
[Save]
button to stop recording and save the MOH message.