Wireless SOHO
Installation and Operation Manual
40
3.14.3 System Speed Dial
Description
Commonly dialed numbers can be stored by the LWS-BS station. Up to 800 System Speed Dial numbers
are available. Each Speed Dial number can be up to 23 digits in length and may include special
instruction codes.
Operation
To dial using a System Speed Dial:
LWS-BS station
1.
Lift the handset or press the
[Speaker]
button.
2.
Press the
[Directory]
soft button.
3.
Press the
[Speed]
soft button.
4.
Dial the desired bin number („200‟-„999‟).
LWS-WK
1.
Lift the handset or press the
[Speaker]
button.
2.
Dial the {Speed Dial Access} code (ex. 558)
or press the
[Speed]
soft button.
3.
Dial the desired bin number („200‟-„999‟).
GDC-450H
1.
Press the (
[Talk]
key).
2.
Dial the {Speed Dial Access} code (ex. 558)
or press the
[Speed]
button ( ).
3.
Dial the desired bin number („200‟-„999‟).
To program a System Speed Dial number:
LWS-BS station
1.
Press the
[Directory]
soft button.
2.
Press the
[Speed]
soft button.
3.
Press the
[Add]
soft button.
4.
Dial the Speed Dial bin number (200-999).
5.
Press the
{
Line }
button or dial the Line access code(ex.9, 8801 ~ 8803).
6.
Dial the number to be stored.
7.
Press the
[Save]
soft button.
8.
If desired, enter a name.
9.
Press the
[Save]
soft button.
Conditions
1.
Accessing an empty Speed Dial bin will return error tone.
2.
All Speed Dial numbers are stored in memory protected from power loss.
3.
A name can be entered for a Speed Dial number to permit access from the Directory.
4.
If a Speed Dial number contains a “Dial-Tone Detect” command, Flash as the first entry in the bin
and dial tone detect is enabled for the Line, the system must detect dial tone before dialing the
Speed Dial number.
5.
The “Allowed/Denied Number” feature is not applied to System Speed numbers 200~399.
Therefore,
the user can make a call with System Speed number 200~399 with no restriction.