Wireless SOHO
Installation and Operation Manual
50
Operation
To place an intercom call:
LWS-BS station and LWS-WK
1.
Lift the handset or press the
[Speaker]
button to receive ICM dial tone.
2.
Dial station number or press the
{Station}
button.
3.
For ring-back tone, await answer.
GDC-450H
1.
Press the (
[Talk]
key) to receive ICM dial tone.
2.
Dial the station number.
3.
For ring-back tone, await answer.
Conditions
1.
Intercom Dial tone will time-out if action is not taken within Dial-Tone Time or, if the time between
digits exceeds the Inter-digit Timer; error tone is received on dial tone time-out.
2.
ICM Dial tone is halted after dialing the first digit.
3.
If the called station is busy, Intercom Busy tone is provided for the Busy Tone time (7 sec.) then,
Error tone is sent by the system; the caller may disconnect or activate a feature such as Voice
Message prior to receiving error tone.
3.18 Intercom Call Hold
Description
While on an active ICM Call, Users can place the ICM Call on hold; the held station will receive the
assigned MOH. The call is placed on Exclusive Hold and recalls at the holding station after the station
returns to idle.
Operation
To place an active ICM call on hold:
LWS-BS station and LWS-WK
1.
Press the
[Hold]
button.
GDC-450H
1.
Press the (
[Navigation]
right key) longer than 1 second;
To retrieve the held ICM call:
LWS-BS station and LWS-WK
1.
Press the
{Station}
button associated with the held station.
GDC-450H
1.
Dial a station number of held station;
Conditions
1. Only one ICM call may be placed on hold at a time.