Wireless SOHO
Installation and Operation Manual
56
3.25.1 Edit CO Code
Description
When dialing an outside call, the user must either access an outside line or dial a CO Line access code.
When placing a call from the Phonebook, the code may be dialed manually or the phone may be
configured to insert automatically a CO Line access code in front of the number. In the latter case, the
code must be configured in the Phone Settings under the Edit CO Code menu. Also, the number must
be configured to enable the
“CO Access Code” when adding the number to the Phonebook, refer to
section 3.25.3
Operation
To assign a CO Code:
LWS-WK
1. Press the
[Menu]
soft button.
2. Select Phone Settings
3. Select Edit CO Code.
4. Press the
[Edit]
soft button.
5. Use the dial pad to enter a Line
access code (ex. „0‟).
6. Press the
[OK]
soft button.
GDC-450H
1. Press
[Menu]
( ) left soft button.
2. Select Phone Settings.
3. Select {Edit CO Code}.
4. Press the
[Edit]
( ) left soft button(CODE-1 only).
5. Use the dial pad to enter a Line access cod
e (ex.‟0‟).
6. Press the
[OK]
( ) left soft button.
3.25.2 Dialing from Phonebook
Description
Records in the Phonebook can be searched and a number can be dialed.
Operation
To dial a number from the Phonebook:
LWS-WK
1. Access the Phonebook menu, see section 3.25 above.
2. Use the
[Navigation]
button to highlight the
Find
selection and press the
[OK]
soft button; the
“Enter Name” prompt is displayed.
3. Enter the first few characters of the name using the dial pad (refer to 3.26.6 Dial Pad Character
Charts). As an example, press 5 twice for „k‟ and 3 twice for „e‟ to search for Kenny.
4. Press the
[Find]
soft button to display the matching records. Note, if no characters are entered, all
records are searched.
5. Use the Up and Down navigation buttons to highlight the desired number.
6. Press the
Speaker
button to dial the number.