Wireless SOHO
Installation and Operation Manual
57
GDC-450H
1. Access the Phonebook menu, see section 3.25 above.
2. Use the
[Navigation]
button ( ) to highlight
Find
and press the
[OK]
( ) left
soft button; the “Enter Name” prompt is displayed.
3. Enter the first few characters of the name using the dial pad (refer to refer to 3.25.6 Dial Pad
Character Charts). As an example, press 5 twice for „k‟ and 3 twice for „e‟ to search for Kenny.
4. Press the
[Find]
( ) left
soft button to display the matching records. Note, if no characters
are entered, all records are searched
5. Use the Up and Down
[Navigation]
button ( ) to highlight the desired record.
6. When the record is found, press the
[Call]
( ) right soft button to dial the number.
3.25.3 Adding Records to the Phonebook
Operation
To add a record to the Phonebook:
LWS-WK
1. Access the Phonebook menu, see section 3.25 above.
2. Use the
[Navigation]
button to highlight the
Add Entry
selection and press the
[OK]
soft button.
3. Enter the name using the dial pad, up to 14 characters, (see charts in section 3.25.6 Dial pad
Character Charts). Press the
[OK]
soft button to complete the entry. Note, if you enter the wrong
character, use the
[Delete]
soft button to delete a character.
4. Enter the phone number for the record using the dial pad and press the
[OK]
soft button.
5. Select whether or not to use the CO Access code (refer to section 3.25.1 Edit CO Code) and press
the
[OK]
soft button. Selecting the CO Access Code will insert the access code in front of the
number during dialing. The CO Access code is entered in the Phone Settings menu.
6.
“Enter Position” and record number are displayed.
To save with displayed record number, press
[OK]
soft button. To modify the record number, press
Modify soft button and enter the record number, 1 ~ 60, using the dial pad and press the
OK
soft
button. This will store the number as the record entered.
GDC-450H
1. Access the Phonebook menu as described in section 3.25 above.
2. Use the
[Navigation]
button ( ) to highlight
Add Entry
selection and press the
[OK]
(
) left soft button.
3. Enter the name using the dial pad, up to 14 characters, (see section 3.25.6 Dial pad Character
Charts), and press the
[OK]
( ) left soft button. If you enter the wrong character use the
[Delete]
( ) right soft button to delete a character.
4. Enter the phone number for the record using the dial pad and press the
[OK]
( ) left soft
button.
5. Select whether or not to use the CO Access code (refer to section 3.25.1 Edit CO Code) and press
the
[OK]
( ) left soft button. Selecting the CO Access Code will insert the access code
in front of the number during dialing. The CO Access codes are entered in the Phone Settings
menu.
6.
“Enter Position” and record number are displayed.
To save with displayed record number, press
[OK]
( ) left soft button. To modify the
record number, press
[Modify]
soft button and enter the record number, 1 ~ 60, using the dial pad
and press the
[OK]
( ) left soft button. This will store the number as the record entered.