Installation and Operation Manual
32
3.3 Call Transfer
Description
Line calls can be transferred to other stations in the wireless SOHO system. Calls can be transferred
announcing the call (screened) or without an announcement (unscreened).
When a Line call is transferred, the Transfer Recall Timer (30sec) is initiated. If the timer expires before the
call is answered, the Hold Recall process is initiated.
Users can transfer an active Intercom call to other stations in the wireless system, using either screened or
unscreened transfer. When used, the Intercom station is placed on Exclusive Hold, and the Transfer Recall
timer is initiated,. if the timer expires before the Intercom call is answered, the call will bounce back (recall)
to the transferring station until answered or abandoned.
Operation
While on a call, to perform a Screened Call Transfer:
LWS-BS station and LWS-WK
1. Press
[Trans]
.
2. Dial the station to receive the transfer.
3. When answered, announce the call.
4. Hang-up to complete the transfer.
GDC-400H/450H
1. Press (
[Navigation right]
) shorter than 1 second.
2. Dial the station to receive the transfer.
3.
When answered, announce the call
.
4. Press (
[End]
key]) to complete the transfer.
While on a call, to perform an Unscreened Call Transfer:
LWS-BS station and LWS-WK
1. Press
[Trans]
.
2. Dial the station to receive the transfer.
3. Hang-up to complete the transfer.
GDC-400H/450H
1. Press (
[Navigation right]
) shorter than 1 second.
2. Dial the station to receive the transfer.
3. Press (
[End]
key]) to complete the transfer.
Conditions
1. The transferring station may camp a call at a busy station (refer to Camp-On).
2. A station in DND or out-of-service
can‟t receive a transfer; any attempt will result in an error tone.
